Digiflavor Drop Solo RDA

$35.99

Digiflavor Drop Solo RDA – 22mm Rebuildable Dripping Atomizer

The DROP SOLO 22mm RDA by Digiflavor and The Vapor Chronicles is the follow-up successor to the wildly successful DROP RDA, featuring a smaller 22mm frame with a unique single coil deck and stepped multi-airslots side airflow control.

Category:

Description

Digiflavor Drop Solo RDA by The Vapor Chronicles – Rebuildable Dripping Atomizer 
Manufactured by GeekVape

The DROP SOLO 22mm RDA by Digiflavor and The Vapor Chronicles is the follow-up successor to the wildly successful DROP RDA, featuring a smaller 22mm frame with a unique single coil deck with horizontal multi-airslots side airflow control. The DROP SOLO RDA implements a smaller form factor, catering for single-coil flavor chasers with two optional frame structure – Stainless Steel and PMMA Low Profile Cap. The build deck implements a two-post, single terminal per post with a notch design that allows from trimming of coil leads. With the metal frame that caters more towards vapor-production, the DROP SOLO integrates 10 small side-holes that are intuitively adjusted via twisting the top cap for a stepped airflow design. The PMMA transparent cap offers a reduced atomizer chamber and lower profile, catering towards flavor-focused performance. Each kit includes various functional accessories, such as 24mm stylish ring, Squonk BF 510 Pin, and a set of prebuilt coils.

Features and Specs:

  • Collaboration by Digiflavor & The Vapor Chronicles
  • A TVCreation Project
  • 22mm Diameter
  • 24mm Optional Beautiful Ring
  • 5mm Deep Juice Well
  • Superior Stainless Steel Construction
  • Optional PMMA Low Profile Cap
  • Two Post, Singler Terminal Per Post Build Deck
  • Large Terminal Openings – Side Secured via Slotted Screws
  • Single Coil Configurations
  • Horizontal Stepped Airflow Control – 10 Small Airslots
  • Airflow Channels Adjusted Vertically via Twisting Top Cap
  • Conical Top Cap Design – Flavor Enhancement
  • Squonk-Ready 510 Bottom-Feeding Pin
  • Gold-Plated 510 Connection

Includes:

  • 1 DROP SOLO RDA
  • 1 PMMA Top Cap
  • 1 PMMA Mid Cap
  • 1 Squonk BF 510 Pin
  • 1 510 Drip Tip Adapter
  • 2 0.35ohm Prebuilt Coils
  • 1 Allen Key
  • 1 Spare Parts Bag
  • 1 Instructional Manual

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.


Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

e-cigz.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

Package Contents:

  • 1 x Digiflavor Drop RDA
    1 x 810 Drip Tip
    1 x 510 Drip Tip Adapter
    1 x BF Squonker Pin
    1 x Set of Spare O-Rings and Screws
    1 x Screwdriver

Reviews

There are no reviews yet.

Be the first to review “Digiflavor Drop Solo RDA”

Your email address will not be published. Required fields are marked *